产 品 规 格 书
PRODUCT SPECIFICATION
产 品 名 称：T8 LED日光灯管(SMD2835) DESCRIPTION：T8 LED Light Tube (SMD2835)
●产品特性 Features
1. 采用1/2铝塑管结构，外观精致，散热效果好。
Using 1/2 aluminum pipe structure, good appearance ，good heat dissipating capacity
2. 内置恒流驱动，高效，稳定钛阳极氧化。
Built-in constant current driver, high efficiency, stability
3. 采用进口贴片LED作为光源，光效高、寿命长。
Using the imported SMD as light source, high light efficiency, long life span.
4. 响应时间快, LED的响应时间为纳秒级。
Quick response time, the LED response time is nanosecond.
Environmental protection, no heavy metals and harmful gas.
6. 节能，比传统荧光灯节能80﹪。
Energy-saving, can save energy more 80% than traditional fluorescent lights.
7. 没有频闪，启动快,光线柔和，保护眼睛。
No flicker, start quickly, soft light, protect your eyes.
8. 容易安装，使用方便。
Easy to install and use.
●技术参数 Technical Parameter
型号Model | T8-12-2835 | T8-9-2835 | T8-6-2835 |
LED 数量 LED Qty | 96PCS | 66PCS | 44PCS |
额定功率 Power | 18W | 13W | 9W |
输入电压 Voltage | AC185-265V |
工作频率 Working Frequency | 50-60HZ |
效率 Power Efficiency | >= 92% |
光效 Luminous Flux | Transparent：100LM/W Frosted：85LM/W |
照度 LUX（1.75M） | 大尺寸触摸屏 Transparent：195 Frosted：145 | Transparent：145 Frosted：105 | Transparent：100 Frosted：70 |
功率因数 Power Factor | >= 0.9 |
温 Colour Temperature | WW: 2800 - 3200K WW:4000 - 4500K W: 6000 - 6500K |
显指示 CRI | Pure White: Ra >= 75; |
发光角度 Bean Angle | 120º |
工作温度 Working Temperature | -20 to +60 ºC |
工作湿度 Working Humidity | 10 - 70% RH |
使用寿命 | 50,000hr life, 3yr warranty |
| | | |
●相对光谱能量曲线 Relative Spectral Energy Distribution
●外形尺寸图 Dimensions
Model | Spec(mm) | 酸洗槽A(mm) | B(mm) | C(mm) | D(mm) |
预测地震的方法T8-12 | L1198*Ø26 | 1198 | 1208 | 26 | 15 |
T8-9 | L894*Ø26 | 894 | 904 | 26 | 15 |
T8-6 | 抢救车 L588*Ø26 | 588 | 598 | 26 | 15 |
| | | | | |
●安装接线示意图 Instruction of wiring The Graphic Illustration for the Exchange of Inductive Ballast LED Tube
电子式镇流器灯管替换示意图
The Graphic Illustration for the Exchange of Electronic Ballast LED Tube
●安装说明 Installation Instructions
1. 安装前先切断原线路电源。
Cut off the original line power before installation;
2. LED日光灯管可直接安装在T8或T10支架上（取下启辉器）；
LED tube lights can be installed directly in the T8 or T10 bracket (remove the starter); 3. 有电子镇流器的不可直接安装，需去掉电子镇流器； If there is an electronic ballast, it can’t be installed directly, you should get rid of electronic ballast; 4. 非专业人士不可自行拆装LED灯管，包括更换PC面罩；
Non-professionals铝塑分离 should not disassemble the LED lamp by themselves, including replace of the PC cover;
5. 使用过程中若有异常请与我司联系，不可随意拆开此产品，否则不作保修。
If there is any unusual problem when using, please contact us. The product couldn’t be open optionally, or no warranty for it.
