摘 要
火漆印章头如何自制
本次设计的小型轧钢机是借助旋转轧辊与其接触摩擦的作用，将被轧制的金属体（轧件）拽入轧辊的缝隙间，在轧辊压力作用下，使轧件主要在厚度方向上完成塑性成型。 本次设计的设计主要包括：电动机的选取，传动部分的设计，减速器的设计，轴系部件的设计，箱体的设计，小型轧钢机主体，机架的设计，其中包括对减速器的润滑和密封等。设计过程按照国家标准和机械设计标准来设计的。 轴的设计和齿轮的设计是本次设计的重点，设计中参照了机械设计手册进行了精确的设计，并进行了强度校核。
本次设计的小型轧钢机结构简单、使用价格低廉，并且符写设计合设计要求，主要针对用来加工链条板的卷带料而设计的。可保证加工后的产品性能良好，表面光洁度高，板型好，能够达到所需的要求。
关键词：小型轧钢机；减速器；轴系部件；传动部件
Abstract
The design of the chain plate rolling machines by drawing on its revolving roller contacts the role of friction will be rolling the metal body (work piece) dragged into the roll gap between the roll under pressure, mainly in the work piece thickness. Completion of the direction of plastic molding.
The Design of this include: the selection of motor, transmission part of the design, the design of speed reducer, shaft components, design, cabinet design, the main chain plate rolling machine, rack design, including reducer such as lubrication and sealing. The design process in accordance with the National Institute of Standards and mechanical design criteria for design.
Shaft design and the design is the focus of this design, the design of the mechanical design reference manual for the precise design, and check the strength.
电机支架The design of the chain plate rolling machine structure is simple and inexpensive to use and in line with the design requirements, mainly for the processing chain for the volume of the material plate designed. Can be processed to ensure good product perform
ance, high surface finish, plate type, and to meet the requirements.
Key words: chain plate rolling machine; reducer; shaft components; transmission parts
摘要…………………………………………………………………………………………Ⅰ
Abstract……………………………………………………………………………………Ⅱ
第 1 章 绪论………………………………………………………………………………1
1.1选题的依据，意义和理论及在应用方面的价值……………………………………1
1.2本课题在国内外的研究现状…………………………………………………………2 1.2.1国外相应机器的研究状况………………………………………………………2
1.2.2国内相应机器的研究状况………………………………………………………2
1.3课题研究的内容及拟采取的方法……………………………………………………3
1.4 课题研究中的主要难点以及解决的方法…………………………………………3
第 2章 设计方案的确定……………………………………………………………………压铆螺栓4
2.1 传动方案的确定……………………………………………………………………4
2.1.1机械传动系统拟定的一般原则………………………………………………负压脉动式清肺仪4
2.1.2 确定最终传动方案……………………………………………………………5
2.2确定各传动结构的传动效率…………………………………………………………6
心理管理第 3章 电动机的选择………………………………………………………………………7
3.1 选择电动机的类型及结构形式……………………………………………………7
3.2 电动机功率的选择…………………………………………………………………8
3.2.1 电动机功率的计算推演挤爆胶囊………………………………………………………8
3.2.2 确定电动机具体型号…………………………………………………………8
3.3确定各轴的功率………………………………………………………………………8
