1 Features
产品特点，特征；
Realised in bcd technology
在BCD技术变现
BCD 二进制
■transition-mode control of PFC pre-regulators
globe7■proprietary multiplier design for minimum THD of AC input current Proprietary所有的；专利的；私人拥有的
■very precise adjustable output overvoltage protection
■ultra-low (≤70μa) start-up current
ULTRA 极端的；过分的
超低（≤70μA）启动电流
■low (≤4 ma) quiescent current
轮胎脱模剂低（≤4 mA时）的静态电流
■extended IC supply voltage range
■on-chip filter on current sense
■disable function
禁用功能
■1% (@TJ = 25 °c) internal reference voltage
■-600/+800mA totem pole gate driver with UVLO pull-down and voltage clamp
-600/+800mA图腾柱栅极驱动器通过欠压锁定下拉和电压钳定
totem pole 图腾柱
电源线扣UVLO 欠压锁定就是让输入电压低于某一个值的时候，电源芯片不工作，出于保护状态。
■dip-8/so-8 packages ecopack®
8孔插/8脚（贴片）封装生态包装
1.1 applications 应用
■PFC pre-regulators for:led驱动电路
– IEC61000-3-2 compliant smps (TV, Desktop pc, monitor) up to 300w
– hi-end ac-dc adapter/charger
– entry level server & web server
Smps switched-mode power supply 开关式电源
compliant smps 兼容式开关式电源
高级的AC-DC适配器/充电器假牙清洁剂
入门级服务与Web服务
2 .
2.1 Description 描述
The L6562 is a current-mode PFC controller operating in Transition Mode (TM). Pin-to-pin compatible with the predecessor L6561, it offers improved performance.
6562是电流模式PFC控制器操作在过渡模式(TM)。L6562D的前任l6561兼容L6562的脚对脚. 它提高更高的性能。
Figure 2. Block Diagram
图2。框图
2.2 Description (continued)
穿孔塞焊The highly linear multiplier includes a special circuit, able to reduce AC input current distortion, that allows wide-range-mains operation with an extremely low THD, even over a large load range.
The output voltage is controlled by means of a voltage-mode error amplifier and a precise (1% @TJ = 25°C) internal voltage reference.
输出电压的控制通过一个电压模式的误差放大器和一个精确的（1％TJ= 25°C）内部电压参考值。
The device features extremely low consumption (≤70 μA before start-up and <4 mA running) and includes a disable function suitable for IC remote ON/OFF, which makes it easier to comply with energy saving norms (Blue Angel, Energy Star, Energy2000, etc.).
该器件具有非常低功耗（≤70μA，前启动和<4 mA的运行），包括禁止功能适用于集成电路远程开/关，这使得它更容易符合节能规范（蓝天使，能源之星，energy2000，等等）。
An effective two-step OVP enables to safely handle over voltages either occurring at start-up or resulting from load disconnection.
The totem-pole output stage, capable of 600mA source and 800mA sink current, is suitable for big MOSFET or IGBT drive which, combined with
